Robe Color mix 575 AT Spezifikationen PDF herunterladen (Seite 7)

4.3. Changing the power supply settings

Both the transformer and the ballast must be connected correctly for the local AC voltage and frequency.

The wrong settings can cause poor performance or demage of the moving head.The factory settings are printed next to the power

switch.

If you want to change the power supply settings,follow the instructions:

1.Disconnect the xture from AC power.

2.Remove the rear cover by loosening the 4 screws.

3.Move the wire (1) on the transformer connection block to the position according to the desired voltage.

4.EU version:Move the wires (2) and (3) on the ballast connection block to the position according to the desired frequency/voltage.

US version:Move the wire (2) ) on the ballast connection block to the position according to the desired frequency.

5.Put the cover back before applying AC power.

Examples:

EU-version

US-version

1 2 3 4 5 6 7 8 9 10 11 12 ... 30 31

Keine Kommentare

Robe Color mix 575 AT Spezifikationen Seite 7