Robe Color mix 575 AT Spezifikationen

Version 2.1

1011 Removable stand:Measurements are in milimetres4.5 Connection to the mainsVerify the power supply settings before applying power!If you wish t

10114.6 DMX 512 connection, master/slave connectionThe wires must not come into contact with each other, otherwisethe xtures will not work at all, or

12134.7 Installation of the barn-doorsYou can install the barn-doors to better dene the iluminated surface.The barn-doors are xed with the 2 screws

12135. DMX Protocol Mode 1 Mode 2 Value Function Type of control Channel Channel 1 1 P

1415Mode 1 Mode 2 Value Function Type of control Channel Channel 3 Colour wheel -ne positi

1415Mode 1 Mode 2 Value Function Type of control Channel Channel 10 9 Zoom 0-255

16176.Controller mode The xtures are individually addressed on a data link and connected to the controller.The xtures respond to the DMX signal fr

16177. Stand - alone modeThe xtures on a data link are not connected to the controller but can execute pre-set programs which can be different for ev

18198.Control menu mapDefault settings=Bold print A001 dM.Ad. 001 : 512 MA.SL. d.AbL MASt.

1819 En.Sn.(On,Off) dISP. turn (On,Off) d.On (On,Off) d.Int.(20...100) MI.SE(1...10...20)

23Table of contents1. Safety instructions ... 32

2021 rESE. SPEC. LA.Ad. Zoom (0-255) CodE AdJ. Func. (0-255) :

20219. Functions of the control panelThe control panel situated on the front panel of the base offers several features. You can simply set the DMX add

2223 Cur.t. --- Current xture temperatures. boAr.-Current temperature on the PCB in the fixture.Temperatures below 85°C are not critical.

22239.4 PersonalityUse this menu to to modify ColorMix 575 AT operating behavior.DM.Pr. --- DMX preseting.Select this function to set desired effects

24259.6 Manual modeSelect this menu to call up presetted positions of channel effects or direct control channel effects.PrE.C. --- Presetted effect co

24252. Press [UP] or [DOWN] to select the desired xture ("MASt." - "SLA.9") and press [ENTER]-button.3. Press [UP] or [DOWN] to s

2627After having calibrated required effects, press [ENTER] to conrm (or [MODE] to cancel and return to the menu without reset by the "A.rES.&qu

2627M.b.Er.This messsage informs you that the main PCB does not communicate correctly with the control panel.F.t.Er.The message informs you that the 

2829Optical System -High luminous-efciency parabolic reector -Standard Fresnel lens of diameter 200 mm - Motorized zoom 10°-26° with the st

2829Dimensions (mm):Optional accessories: Barn-doors...No. 99011064 Wide-angle lens...No. 99011082

23CAUTION!Keep this device away from rain and moisture!Unplug mains lead before opening the housing!FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL

3031Replacing the fuseIf the lamp burns out, the ne-wire fuse of the device might fuse, too. Only replace the fuse by a fuse of same type and rating.

3031

452.Operating determinationsThis device is a projector for creating decorative effects and was designed for indoor use only.This device is designed f

453.Description of the device1 - Mounting bracket 4 - Front cover 2 - Rear cover 5 - Fresnel lens3 - Adjusting screw Con

4.Installation4.1Fitting/Exchanging the lampDANGER ! Install the lamp with the device switched off only.Unplug from mains before !To insert the lamp

4.3. Changing the power supply settingsBoth the transformer and the ballast must be connected correctly for the local AC voltage and frequency.The wro

894.4 RiggingDANGER TO LIFE! Please consider the respective national norms during the installation! The installation must only be carried out

89Overhead installation. The mounting bracket provides 3 holes (a diameter of13mm) and 2 quarter-circle slots. To adjust the inclination-angle,loose