Robe ROBIN Pointe Spezifikationen PDF herunterladen (Seite 36)

The front objective lens will require weekly cleaning as smoke-uid tends to building up residues, reducing

the light-output very quickly. The cooling-fans should be cleaned monthly.

The interior of the xture should be cleaned at least annually using a vacuum-cleaner or an air-jet.

Dichroic colour lters and gobo wheels and the internal lenses should be cleaned monthly.

Remove dust and dirt from the fans and cooling vents using a soft brush and vacuum-cleaner.

Important! Check the air lters periodically and clean before they become

clogged!

Clean the air lters placed in the xture head and base. Use a vacuum cleaner, compressed air or you can

wash them and put back dry.

After replacing the air lters, reset the elapsed time counter in the menu "Information" (Information--->Air Fil-

ters---> Elapsed Time).

Replacing the fuse.

Before replacing the fuse, unplug mains lead.

1) Remove the fuse holder on the rear panel of the base with a tting screwdriver from the housing

(anti-clockwise).

2) Remove the old fuse from the fuse holder.

3) Install the new fuse in the fuse holder (only the same type and rating).

4) Replace the fuseholder in the housing and x it.

11. ChangeLog

This section summarizes all types of changes in the user manual.

Version of the

manual

Date of issue Description of changes

1.1 29/04/2013

Added function " Lamp Power" into menu "Lamp".

DMX chart version of 1.1

1.2 10/05/2013

Added Demo program to tab "Stand-alone"

1.3 20/05/2013

Added chapter Lamp adjustment

1.4 06/06/2013

Fan Error messages added

1.5 13/05/2013 New DMX chart vers. 1.3 (Added Mode 3)

1.6 02/09/2013

Error messages regard lamp driver added in menu Fixture Errors

(Info-->View logs--> Fixture Errors)

1.7 29/05/2013

Added sACN protocol

Specications are subject to change without notice.

May 29, 2014

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 47 48

Keine Kommentare

Robe ROBIN Pointe Spezifikationen Seite 36