Robe ROBIN Pointe Spezifikationen PDF herunterladen (Seite 24)

been fabricated.

Maximum Res. - A maximum temperature of the xture head since the counter

was last reset.

In order to reset this counter to 0, touch the text box next to the item "Maximum Res."

Base Temperature - The menu shows temperature in the xture base (on the display PCB).

Current - A current temperature in the xture base.

Maximum NonRes. - A maximum temperature in the xture base since the xture has

been fabricated.

Maximum Res. - A maximum temperature in the xture base since the counter

was last reset.

In order to reset this counter to 0, touch the text box next to the item "Maximum Res."

Ambient Temperature - The menu shows temperature of the induced air on the fan in the xture base .

Current - A current temperature of the induced air in the xture base.

Maximum NonRes. - A maximum temperature of the induced air in the xture base since

the xture has been fabricated.

Maximum Res. - A maximum temperature of the induced air in the xture base since

since the counter was last reset.

In order to reset this counter to 0, touch the text box next to the item "Maximum Res."

DMX Values - The menu is used to read DMX values of each channel received by the xture.

Wireless State - The menu serves for reading of the wireless operation status (only for Wireless DMX ver-

sion).

Software Version - Select this item to read the software version of the xture modules:

Display System - A display processor on the display board in the xture base

Module M - A pan/Tilt processor

Module G - A Static and rot. gobos + colours processor.

Module P - The prisms and frost processor.

Module O - A focus/zoom/strobe processor

Product IDs - The menu is used to read the MAC Address ,RDM UID and RDM Label.

View Logs - Use this menu to read xture´s data which have been recorded during xture operation. This

colected data allows easier troubleshooting.

Fixture Errors - Use this menu to read xture errors which have occured during xture operation.

There is a list of error folders:

Pan Errors Prism I Errors

Tilt Errors Prism I Rotation Errors

Dimmer Errors Prism 2 Errors

Gobo Carousel Errors Prism 2 Rotation Errors

Colour Errors Lamp is Too Hot

Gobo Errors Overheated

Clean Air Filters Active Lamp Timer

Static Gobo Errors Lamp Errors

Focus Errors Temp. Sensor Errors

Zoom Errors Frost Errors

Error messages regard the lamp driver:

Lamp driver overheated- the lamp driver switched off due to over temperature of driver board.

Lamp driver output short circuit detected - the lamp driver switched off due to a detected short of output

connector or lamp electrodes.

End of lamp life detected - the lamp driver switched off due to end of lamp life time reached,lamp voltage

too high caused by electrode burn back (gap)

Lamp did not ignite - the lamp driver detected that lamp is not on within specied ignition time.

Lamp extinguished during normal operation - the driver switched off due less current through the lamp.

Lamp extinguished during run-up phase - the driver switched off due to too less current within initial

preheat phase of lamp start (approx. initial 2sec)

Fixture States - Recorded following actions: Fixture On, Fixture Off, Lamp On, Lamp Off.

Fixture Position - Recorded installation positions of the xture:

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare

Robe ROBIN Pointe Spezifikationen Seite 24

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Flutlichter Robe ROBIN Pointe