Robe ROBIN Pointe Spezifikationen PDF herunterladen (Seite 30)

command. If the lamp is started directly from the control panel, the time delay will be ignored.

Lamp Light Sensor - Select this item to switch the light sensor off. The option "On” is intended for a standard

operation. The option "Off” is for “emergency operation” only! If the lamp light sensor is switched off, the xture

will still try to ignite the lamp (even when the lamp is damaged or absent), on this account some electronics

parts of the xture can be damaged!

Lamp On/Off Settings - Use the menu to set rules for automatic switching on/off the lamp.

Lamp On Power On - If the item is on, the lamp will be automatically turn on after switching the

xture on.

Lamp Off via DMX - The item enables to switch the lamp off via DMX command from DMX

controller.

Lamp On if DMX Present - The item allows you to strike the lamp automatically after 26 seconds

if DMX signal is present on the xture´s DMX input.

Lamp Off if not DMX - The item allows you to switch off the lamp automatically after 2 minutes

if DMX signal is missing on the xture´s DMX input.

7. RDM

This xture supports RDM operation. RDM (Remote Device Management) is a bi-directional communications

protocol for use in DMX512 control systems, it is the new open standard for DMX512 device conguration and

status monitoring.

The RDM protocol allows data packets to be inserted into a DMX512 data stream without adversely affecting

existing non-RDM equipment. By using a special „Start Code,“ and by complying with the timing specications

for DMX512, the RDM protocol allows a console or dedicated RDM controller to send commands to and receive

messages from specic moving lights.

RDM allows explicit commands to be sent to a device and responses to be received from it.

The list of commands for Robin Pointe is the following.

Parameter ID Discovery command SET command GET command

DISC_UNIQUE_BRANCH *

DISC_MUTE *

DISC_UN_MUTE *

DEVICE_INFO *

SUPPORTED_PARAMETERS *

SOFTWARE_VERSION_LABEL *

DMX_START_ADDRESS * *

IDENTIFY_DEVICE * *

DEVICE_MODEL_DESCRIPTION *

MANUFACTURER_LABEL *

DEVICE_LABEL * *

SENSOR_DEFINITION *

SENSOR_VALUE *

DISPLAY_INVERT * *

DISPLAY_LEVEL * *

PAN_INVERT * *

TILT_INVERT * *

DEVICE_RESET *

DMX_PERSONALITY * *

DMX_PERSONALITY_DESCRIPTION *

STATUS_MESSAGES *

STATUS_ID_DESCRIPTION *

LAMP_STATE * *

LAMP_ON_MODE

* *

DEVICE_HOURS

LAMP_HOURS

LAMP_STRIKES

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare

Robe ROBIN Pointe Spezifikationen Seite 30

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Flutlichter Robe ROBIN Pointe