Robe Color Wash 575E AT Spezifikationen PDF herunterladen (Seite 27)

program and the 3 free programs,each up to 99 steps.Each program step has a step time.

Step time-the time,during which effects last in the current step.

Procedure:

1. Select the program you want to edit (“Program 1” - “Program 3”) and press [ENTER].

2. Select “Edit Steps” menu and press [ENTER].

3. Select the desired program step (“Step 01” - “Step 99”) and press [ENTER].

4 Select the desired item and press [ENTER].Now you can edit DMX value for selected item:

“Pan”- a coarse pan,value 0-255

“Tilt” - a coarse tilt,value 0-255

“Pan/Tilt Speed “ - a speed of pan/tilt movement,value 0-255

“Spec. Func.” - a special functions, lamp on/off,reset,value 0-255

“Pan/Tilt Macro” - a pan/tilt macro,value 0-255

“P./T.Macro Speed” - a pan/tilt macro speed,value 0-255

“Colour Wheel” - a colour wheel ,value 0-255

"Cyan" - a cyan, value 0-255

"Magenta" - a magenta, value 0-255

"Yelow" - an yellow, value 0-255

"Conversion Filter" - a conversion temperature lter, value 0-255

"CMY Colour Macro" - a CMYcolour macro, value 0-255

"Effect Speed" - a effect speed, value 0-255

"CMY+CTF speed" - a CMY and CTO lter,value 0-255

"Effect Wheel " - an effect wheel, value 0-255

"Effect Indexing" - a beam shaper rotation,value 0-255

“Zoom” - a zoom,value 0-255

“Shutter/Strobe” - a shutter and strobe,value 0-255

“Dimmer” - a dimmer intensity-coarse ,value 0-255

5. Select “Save” or “Save and Copy” and press [Enter] to conrm adjusted values:

“Save” - saving the current prog. step

“Save and Copy” - saving and copying the current prog. step to the next prog. step .

6. Go on next prog. step and repeat this procedure (steps 4 and 5).

After creation the program,you can simply reduced its length (by changing the start/end steps) using the “Start

Step” and “End Step” menu.

8.8 Reset functions

The ColorWash 575E AT can be reset totally or by function modules.Select relevant function to run a reset:

Reset All --- This function enables the xture to index all effects and return to their standard positions.

Pan/Tilt --- This function resets pan and tilt.

Colour System --- This function resets colour wheels.

Zoom/Effect wheel --- This function resets zoom and effect wheel.

Dimmer/Strobe --- This function resets dimmer/strobe module.

8.9 Special functions

Use this menu for special services like adjusting lamp or adjusting effects.

Lamp Adjustment --- This function can be used when you make the ne adjustment of the lamp.If you select

this function,all effects will be canceled,shutter will be opened and the dimmer intensity will be set onto 100%.By

using the options “PAn, Tilt, Zoom” you can aim the light at a at surface (wall) and perform the ne lamp

adjustment.

Effect Adjustment --- By this function you can calibrate and adjust the effects to their standard/right positi-

ons.Disconect the DMX controller from the xture and select “DMX Values” menu.The display shows step by

step effects by which you can adjust the xture to the required position before the function calibration. When

the positioning is nished ,select “Calibrate Values” and press [ENTER]:

1. Calibration via the control board

Select desired effect, press [ENTER] and adjust its right value (0 - 255). This can be repeated for each calibred

effect if it is required. When the calibration is nished, it is necessary to use the “Save and Reset” function to

write the calibration values to the memory and to make a reset in order to check the newly adjusted positions

of the calibrated effects.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 33 34 35

Kommentare zu diesen Handbüchern

Keine Kommentare

Robe Color Wash 575E AT Spezifikationen Seite 27

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Flutlichter Robe Color Wash 575E AT