Robe Robin 100 LEDBeam Wireless DMX CRMX Spezifikationen PDF herunterladen (Seite 33)

11.1 Replacing fuse

1.Replace the fuse by a fuse of the same type and rating only.

Before replacing the fuse, unplug mains lead!

2. Remove the plastic covers of the base (3) by unscrewing 5

fastening screws (1) and (2) on each cover.

3. Unscrew four screws (4) on the top chassis (5). Lay down

the xture and unscrew four screws (6) on the bottom plate

(9) to push out inside module of the base.

4. Unscrew two screws (8) on the bottom plate to remove

rear panel of the xture (7).

5. Now you have access for the fuse holder (10) in the inside

module of the base.

6. Remove the old fuse from the fuseholder.

7. Install the new fuse into the fuseholder.

8. Assemble the base of the xture.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38

Keine Kommentare

Robe Robin 100 LEDBeam Wireless DMX CRMX Spezifikationen Seite 33